A range of contact blocks suitable for use with ABB 22mm pilot devices A range of contact blocks suitable for use with ABB 22mm pilot devices

A range of contact blocks suitable for use with ABB 22mm pilot devices A range of contact blocks suitable for use with ABB 22mm pilot devices

A range of contact blocks suitable for use with ABB 22mm pilot devices A range of contact blocks suitable for use with ABB 22mm pilot devices

A range of contact blocks suitable for use with ABB 22mm pilot devices A range of contact blocks suitable for use with ABB 22mm pilot devices

A range of contact blocks suitable for use with ABB 22mm pilot devices A range of contact blocks suitable for use with ABB 22mm pilot devices

A range of contact blocks suitable for use with ABB 22mm pilot devices A range of contact blocks suitable for use with ABB 22mm pilot devices

A range of contact blocks suitable for use with ABB 22mm pilot devices A range of contact blocks suitable for use with ABB 22mm pilot devices

The OFAZ plastic fuse bases fulfil the highest requirements with a total safety concept.The fuse bases can be used in combination with NH fuselinks according to IEC 60269-2 and DIN VDE 0636-2 and solid links.

Current sensor CS, mandatory accessory for Ekip UP+.

Current sensor CS, mandatory accessory for Ekip UP+.

Current sensor CS, mandatory accessory for Ekip UP+.

Current sensor CS, mandatory accessory for Ekip UP+.

Current sensor CS, mandatory accessory for Ekip UP+.

Current sensor CS, mandatory accessory for Ekip UP+.

Current sensor CS, mandatory accessory for Ekip UP+.

Current sensor CS, mandatory accessory for Ekip UP+.

AF contactors are AC/DC operated AF09-AF38 contactors include an electronic coil interface accepting a wide control voltage Ucmin - Ucmax. Only four coils cover control voltages 24 → 500 Vac or 20 → 500 VdcAF..Z contactors equipped with a Z coil type allow direct control by 24 Vdc, 500 mA PLC output and obtain a reduced holding coil consumptionAF.Z contactors withstand short dips and voltage interruptions (SEMI F47-0706 compliance)AF40-AF96 contactors are mainly used for controlling 3-phase moto

UA contactors can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current.The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making.These contactors are of the block type design with:• 3 main poles and 1 built-in auxiliary contact• control circuit: AC operated• add-on auxiliary contact blocks for front or side mounting and a wide range of accesso

UA contactors can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current.The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making.These contactors are of the block type design with:• 3 main poles and 1 built-in auxiliary contact• control circuit: AC operated• add-on auxiliary contact blocks for front or side mounting and a wide range of accesso

UA contactors can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current.The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making.These contactors are of the block type design with:• 3 main poles and 1 built-in auxiliary contact• control circuit: AC operated• add-on auxiliary contact blocks for front or side mounting and a wide range of accesso