DFPD-160-RP-90-RS45-F07-17-R3-C-VDE2 · FESTO
กระบอกลมโรตารี่, ซีรีส์ DFPD
รวม VAT แล้ว
฿14,521.00
฿12,502.10
✓
พร้อมส่ง
20 ชิ้น
ในสต๊อก
🚚
จัดส่งภายใน
93 วัน
ราคาพิเศษตามจำนวน
จำนวนชิ้น (Qty.)
ราคา (Unit Price THB.)
1 ขึ้นไป
฿14,521.00
฿12,502.10
สินค้าของแท้ 100%
ออกใบกำกับภาษีได้
จัดส่งทั่วประเทศ
ยิ่งสั่งมาก ยิ่งคุ้ม
คุณแพรว
ฝ่ายขาย
ไม่แน่ใจว่าสินค้ารุ่นนี้ตรงหรือไม่?
สอบถามสเปก ราคา และระยะเวลาจัดส่งได้เลยค่ะ
การใช้งานและสินค้าใกล้เคียง
ข้อมูลการใช้งานและสินค้าใกล้เคียง
ระบบจะแสดงข้อมูลที่เกี่ยวข้องกับสินค้านี้ในส่วนนี้
รีวิวสินค้า
Product Specification
| PFD | 1.01e-07 |
|---|---|
| PFH | 1126 |
| MTTFd | VDMA24364-B1/B2-L |
| Weight | 6990 |
| Cam material | POM |
| Swivel angle | 90 |
| Cover material | Die-cast aluminum, coated |
| Seals material | NBR |
| Shaft material | High-alloy stainless steel |
| Safety function | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. |
| Housing material | Wrought aluminum alloy, anodized |
| Shaft connection | 5.9 |
| ATEX category gas | II 2G |
| Closing direction | Clockwise closing |
| Mode of operation | Single-acting |
| Mounting position | Any |
| Note on materials | T17 |
| Structural design | Gear rack/pinion |
| Material of piston | Wrought aluminum alloy, anodized |
| Material of screws | High-alloy stainless steel |
| Material of spring | 85.7 |
| Flange hole pattern | F07 |
| Manufacturer part # | Spring steel |
| Material of bearing | Die-cast aluminum |
| Material of sub-base | RoHS-compliant |
| Pneumatic connection | G1/4 |
| ATEX category for dust | II 2D |
| Depth shaft connection | 19 |
| LABS (PWIS) conformity | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) |
| Size of valve actuator | 160 |
| Maritime classification | See certificate |
| Max. Ambient temperature | 80 |
| Max. Storage temperature | 60 |
| Min. Ambient temperature | -20 |
| Min. Storage temperature | -20 |
| Operating Pressure Range | 0.2～0.8 |
| Nominal operating pressure | 4.5 |
| Safety integrity level (SIL) | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode |
| Certificate issuing authority | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 |
| Explosive ambient temperature | -20 <= Ta <= +80 |
| Standard connection for valve | ISO 5211 |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress |
| End-position adjusting range at 0° | -5 ... 5 |
| Explosion prevention and protection | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) |
| Type of ignition protection for gas | Ex h IIC T4 Gb X |
| Devices type according to VDMA 66413 | Safety device |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Type of (ignition) protection for dust | Ex h IIIC T105°C Db X |
| Information on operating and pilot media | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Spring return torque at 0° swivel angle | High-alloy stainless steel |
| CE marking (see declaration of conformity) | as per EU explosion protection directive (ATEX) |
| Spring return torque with 90° swivel angle | 43.3 |
| UKCA marking (see declaration of conformity) | acc. to UK EX instructions |
| Explosion protection certification outside the EU | EPL Db (GB) EPL Gb (GB) |
| End-position adjusting range at nominal swivel angle | -5 ... 5 |
| Torque at nominal operating pressure and 0° swivel angle | 88.4 |
| Torque at nominal operating pressure and 90° swivel angle | 46 |
| Certified for safety function to ISO 13849 and IEC 61508 (SIL) | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture |
| Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° | 0.00078 |
| Connection point for positioner and position sensor conforms to standard | VDI/VDE 3845 size AA 1 |
