Other Interfaces

LIN J2602 Transceiver

Video Sync Separator Extracts Timing Information including Composite, V-SYNC,Burst/Back Porch Timing

Panel Bus Digital Receiver

HDMI Companion Chip with I2C Level Shifting Buffer 12-Channel ESD Protection, and Current-Limit Load Switch, Supported HDMI 1.4 Data Rate

Low-Power Bidirectional I2C Isolator, Two Isolated Bidirectional Channels for Clock and Data Lines, Isolation 2.5kVrms, 1-MHz, AEC-Q100 Qualified

General-Purpose Six-Channel Reinforced Digital Isolators with Robust EMC, 4 Forward/2 Reverse Channel Direction, 50 Mbps, Default Output Low

12-Ch 1:2 MUX/DEMUX Switch with Integrated 4-Ch Sideband Signal Switching for DVI/HDMI/DisplayPort HDMI v1.4, DVI 1.0, DP 1.1a, Bandwidth 2.2GHz

Low-Power Bidirectional I2C Isolator, Two Isolated Bidirectional Channels for Clock and Data Lines, Rated Isolation 2.5kVrms, up to 1-MHz Operation

I2C Bus Extender, for Buffering Highly-Capacitive I2C Bus Systems, Dual Bidirectional Unity Voltage Gain Buffer with No External Directional Control

Parallel Port to MIPI DSI Bridge IC, RGB to DSI, Support RGB 24-bit Data Bus, MIPI DSI Version 1.02.00, 4 Data Lanes, 1Gbps per Data Lane

LIN Transceiver for Automotive,Compliant with LIN2.0,LIN2.1,LIN2.2,LIN2.2A,Built-in Terminator for LIN Slave,Max Transmission Rate 20kbps

4bit LVDS Transceiver,3.3V Single power Supply Input Current 20uA(max) >500 Mbps(250MHz) Switching Rates

Multiple Input Switch Monitor LSI for Automotive Fully Operational Voltage Range: 8V to 26V Input Voltage on Switch Pin: -14V to +40V

4bit LVDS Receiver,3.3V Power Supply Design Input Current 20uA(max) >500 Mbps (250MHz) Switching Rates

IrDA Controller LSI Built-In Ir Remote Control Compatible with IrDA Physical Layer Version 1.0 1.1,1.2 and 1.3,Parallel Interface

4-Channel UART Device with SPI Interface, Send and Receive Hardware Cache, Support 256 FIFO, Operating Voltage 2.5 - 5.0 V